Lou asked ... Mac Allister 35cm electric lawn mower?    |    Ronald Charlwood asked ... Beko fridge/freezer not cold enough?    |    John Broadbent asked ... Advise?    |    suzy asked ... Brother kh-940 not in sync with DAK9 in interactive knitting?    |    Susan asked ... How can I stop my steam iron spraying water with the steam?    |    Click here to ask your question

how do i remove the motor cover on my kenmore 116 vacuum?

how do i remove the motor cover on my sears kenmore model 116 vacuum
gord, March 2007
The guys that put this thing together were evil. There are 4, #2 headed Phillips screws. Two are located under the cord retract plate, which if you pull up firmly will snap up and off. Be prepared to catch the spring as it flies out. To get to the other 2, raise the dust bag top all the way and slip a narrow case knife under the curved slide hinges and pry upwards gently. You may have to do this on both sides. The top will now swing all the way off. The other two screws are under the arms. Took me and a photo optic lighted tube about an hour to get the top off. It can be done in less than ten minutes with this info. Good luck.

Larry McNeill, fixit@texoma.net, March 2007
link Click here to see other fixes for Kenmore.