GG asked ... Fix food processor motor?    |    T asked ... How do I turn the delay off on Electrolux DX302 dishwasher?    |    Helen asked ... How can I mend my Kenwood Gourmet FP505?    |    Roy Turner asked ... Kohlangaz Gosford HE fire?    |    Peter asked ... How can I mend a Powerwasher PRO PRO1800PWE?    |    Click here to ask your question

I have a baxi solo 40 wall mounted boiler?

We have replaced the gas valve and the thermo coupler, when the boiler goes from the pilot light to main burner the boiler explodes as though there is to much gas, what can be done to rectify.
S Thompson, March 2007
i thought he had just fitted it. it could be a number of things needs to be looked at to pin point problem.

hi-spec plumbing, March 2007
It was working fine for about 2 weeks from changing parts, then the problem occoured. Thanks for your help, i will get in touch with corgi.

S Thompson, March 2007
It was working fine for about 2 weeks from changing parts, then the problem occoured

S Thompson, March 2007
i can't say 100% what he has done without seeing. or what he has touched. has it worked right since he left. it may be the solinoid valve not shutting fully letting excess gas in

hi-spec plumbing, March 2007
The gas settings are pre-set and marked with red paint, indicating that these are not to be adjusted, so how come the gas valve needs re-setting

S Thompson, March 2007
heard that one before. so now you have no boiler. i would get his corgi number checked u can do that online. don't mean he is registered because he has a card. or phone corgi tell them the problem. cause you will not see him again and your out of pocket

hi-spec plumbing, March 2007
HI Spec plumbing.
We used a corgi registered plumber to install valve and thermo coupler, but he is to busy to return.

S Thompson, March 2007
did he show you his card.? im shaw corgi would look foreward to your call. thats a bad mistake to make.

get him back to do a proper job and finish it, cause as it stands that boiler is danerous. hope you haven't paid.

hi-spec plumbing, March 2007
hi spec plumbing
I had a gas corgi engineer to carry out repairs to valve and thermo coupler

SThompson, March 2007
ha ha you have to laugh at the things people do. i thought they only blow there selfs up on cartoons.
nevermind another cowboy cock up.

lone ranger rides again yer har, March 2007
you have not set the gas properly. now you need a gas engineer to set it,

as what you have just done is illigal and dangerous.

hi-spec plumbing, March 2007
link Click here to see other fixes for Baxi.