3 hours ago Karen asked ... Royal 480nt cash register?    |    andrew smith asked ... 2009 fiesta 1388 cc titainum?    |    Eric asked ... Strimmer fuel line?    |    Frank asked ... Working fine. No cold air?    |    c.m.brown asked ... Replace chuck on aeg power drill sb2e 700r?    |    Click here to ask your question

how do i wire a emersion heater to a fused spur?

i need clarification on wiring a emersion element that is already installed to the storage tank but not wired to the fused isolator spur in the airing cuboard. easy schematic is all i require.
andy joslin, March 2007
Make sure supply is isolated first !!!
The Fused spur should idealy be a switched fused spur with a neon indicator !! The terminals in the fused spur will be labeled " Load L & N" using 1.5 MM heat resisting flexible 3 core cable. Brown to L Blue to N and grean and yellow to the earth connector in the spur. Inside the imersion heater The blue wire goes to the N terminal The green and yellow goes to the Centre fixing bolt secured under the bottom nut and clamp washer. The brown goes to the L terminal of the internal thermostat. There should be a link wire allready fitted between the Output terminal of the thermostat and the L connection of the heating element.

Lynton, April 2007
what cable are you useing ?

hi-spec plumbing, March 2007