home Fix label Video label_important Televisions category Beko

how can i fix my beko idtv 28c723idw?

i have lost all of the digital channels and there is no `digital setup`in the menu`s?ie no way of tuning them in again..

Robert, April 2007

home Fix label Video label_important Televisions category Bekodone

I have the same problem (it never really has worked all that well) and now mine switches off by itself too. The last time it did play up I unplugged all the leads and depressed the "on" button for 1 minute - fired it all up again and the digital tuning option re-appeared. Doesn't seem to work this time though.

Richard, February 2010

Yup same problem. Tried the internet to find a solution but both sound quite troublesome.

Benji, December 2009

scrap it ive got one too

bot, July 2008

My Beko did this too.

Apparently it's a faulty digital decoder board inside. Only 2 ways to fix this and both need a Beko approved engineer to do it:

1 - Reload the firmware.
2 - If '1' fails, replace the board.

Give Beko service a ring and they should sort it out for you.

Stuart Judd, August 2007

i have got the same problem can only get channels 1-5. its as if there is a problem with the digital reciever in the set

bob, August 2007

I've got the same problem, its only just developed.. Anyone got any support ideas on this?

Alex, July 2007

My identical model has done this too. Its well annyoying! Seems a common fault!

William, May 2007

I've had the same problem within the last 2 days. I notice in the manual that channels 1-899 are assigned to digital channels, 900-999 to analogue. Now only channels 1-99 are available on the TV...

Steve, April 2007

link Click here to see other fixes for Beko.