Bosch WFF 2001 - It seems to go thru wash cycle fine, altho it seemed longer, then the rinse light comes on and it tries to cycle a bit, but then goes straight to flashing spin light but stops. If I turn programmer to spin it will spin and the washing seems to be fine. All the connections seem good and pump empties machine during wash cycle. Any ideas, thanks

Colin G, April 2007

Check the brushes on the motor haven't worn out. new brushes have a full 40mm, but when they get down to about 8mm, they start to fail. Simple job to replace them, just disconnect power, tip machine onto its side for access and remove/replace.

Tim, May 2007

no it doesn't, none of the special function buttons are on.

Colin G, April 2007

does the appliance have a rinse hold /crease guard function make sure these are not in use

steve, April 2007