Where can I purchase a new plug in power supply for my Fellowes Powershred PS 30?

Joyce Kubicki, May 2007

yes i need a power supply for the PS-55 15V 1.5 amp i see that some here have a spare but no contact information. i lost my power supply during a move from my old apartment. Fellows does not sell these any more.
elah4 at zoominternet.net
thank you

Rodger Hale, June 2013

I am using a universal power supply that has a power setting from 2 to 12 volts, and a switch to reverse the polarity (which in this case just reverses the forward and reverse on the shredder). The power supply claims to produce a max of 800 ma at 12 volts. it works fine with one sheet of thick copy paper at a time, two or more tend to jam.(because of the low voltage) Since this is well below the stated need for 15 volts dc and 1400 ma that ffelllowes says is necessary, I suspect any generic universal PS with at least 12 VDC and 1 amp output would be sufficient. Of course, one with 15 VDC and 1.4 amps would be perfect... Hope this helps! Ansd yes, I just used the shredder on my taxes. BEFORE i sent them! :)

arnold coley, February 2010

I would like to get Fellows Powershred PS 30 powerpack. SW Ontario, canada seems to have one. can SW respond?

Sam, Buffalo NY, November 2009

The specs on the power supply are Fellowes Class 2 model (A57-013-15Z01)120 vac 60hz 39w 15vdc- 1.4 amp Part #36083 made exclusively for Fellowes manufacturing co.

So you need a 15 Volt DC w/ 1.4 amps

Hope this helps out.

zero cool, September 2009

Educated And Proud Of It:
DUH Take your happy ass to fellowes.com and this is all you'll find regarding power requirements for their shredders:
"Often, our customers ask us about the power specifications on their older units so that they may attempt to replace with a universal power supply. Because universal power supplies do not come equipped with thermal over load protection and increase the risk of over heat, possible product damage and poses a fire hazard.

Putting it simply, it is dangerous to use universal power supplies and Fellowes cannot in good service provide power specifications for this reason. We apologize for this inconvenience"

Proud of your education?? Your comment makes you look like a moron.

If any of you know what the power supply specifications are please post them. This is driving me crazy, I can;t find the specs anywhere. Thank you.

just your average joe, June 2009

DUH find out its power requirments then take your happy ass to radioshack and get a sufficient power supply.

Educated And Proud Of It, April 2009

I need one for a PS 40!

John, December 2008

I have stripped the gears on my Fellows PS 30, so I have a power supply if anyone needs one.

SW Ontario, Canada, October 2008

Hello
I also am looking for a PS 30 power cord. I got this shredder from my sister who since passed and I really wanted to keep it....I would cry if I had to replace it. I
accidentally ran the cord in the shredder and its stuck now. I just had a birthday and two friends bought me a shedder but I really wanted to keep this old thing because its from my sis.
Can anyone help me?

Mary, September 2008

I need a plug-in power supply for my Fellowes Powershred PS30. Any help will be appreciated.
AO South Carolina

Outland, August 2008

I don't know if you can buy one new or not from fellowes, but if I am not able to fix my PS30 that I just jammed and I think may have stripped the gears {It's been making a knocking noise for awhile} I will have a power supply that will be no use to me!

Barb Shoman, May 2007