I HAVE A BAXI BAHAMA 100 COMBI BOILER, THE CENTRAL HEATING WORKS FINE, BUT THE HOT WATER IS NON EXISTANT!
THE BOILER FIRES UP, THEN SHUTS BACK DOWN! I HAVE CHANGED THE FLOW SWITCHES, BOTH PRINTED CIRCUITS AND THE 3 WAY VALVE! BUT STILL NO LUCK!
PLEASE HELP!

ANDREW DICKINSON, May 2007

THERE ARE TWO FLOW SWITCHES, 1 FOR THE HOT WATER ON THE LEFT HAND SIDE, 1 FOR THE CENTRAL HEATING ON THE RIGHT! YOU HAVE TO TAKE OFF THE LARGE BOILER COVER, THEN DROP DOWN THE LOWER PANEL TO GET AT THE MAIN WORKINGS OF THE BOILER.
THE FLOW SWITCHES ARE BLACK WITH 2 WIRES GOING INTO THE TOP OF THEM, THE WIRES HAVE A PLUG TO DISCONNECT, ABOUT 2 INCHES DOWN THE WIRE FROM THE FLOW SWITCHES.
HOPE THIS HELPS

ANDREW DICKINSON, July 2007

I have the same problem, except I can't find the flow switch to replace it, can you help?

Rachel from Reading, June 2007

NO, NO RESPONSE YET!

ANDREW DICKINSON, June 2007

Have you got it fixed? I have a similar issue.

Thanks

Daniel Young, June 2007