Pam asked ... Do I need to open the housing to dry the motor?    |    James asked ... Remove enterprise enrolment from an Asus Chromebook C523N?    |    tom schwartz asked ... Bosch maxx 6?    |    Noman asked ... Reverse light switch?    |    Suzie asked ... Stuck Feed dog?    |    Click here to ask your question

How can I fix my Indesit WIA121?

on my Indesit WIA121 washer the door lock and anti crease led's come on together when the machine tries to spin. It spins slowly a couple of times and then just stops and starts flashing. Any ideas how to fix it? I've tried the old take the plug out trick but it just does it again at that point in the cycle.

Thanks
Claire Bannister, May 2007
I had exactly the same symptoms, but instead found that the pump blades were blocked with coins!

SkiTuscany.com, November 2009
i have a indesit wia 121,there is no power to it though the fuse is ok,,,any ideas???????????

ed newman, August 2008
how do i change a bearing

andy, May 2008
u have a blocked sencor pippe ;look on pump 4 skinny pipe ;disconnect and trace 2 secor ;disconect and clean ;make sure u can blow down pipe

dave, May 2007
link Click here to see other fixes for Indesit.