when i set the programme cycle eg. normal after about 2-3 mins the machine empties and finishes.when i open the machine the first 3 lights on the display are flashing and the 5th light is on permenantly.PLEASE HELP

JUSTIN, February 2005

Ed you are a genius!!

I have been distraught waiting for an engineer to come and have a look at my dishwasher. I found this site, followed your instruction and BINGO!I have cancelled said engineer and I hail you as a hero.

Thanks sooooooooo much

Diane, October 2008

Can't believe this has worked. I prepared myself for needing to replace this dishwasher and searched the internet first to check what the LED lights meant. What I would say is once you turn on the switch you need to quickly press the button to get it to reset.

rick, July 2007

wahey!!!!
your a star! hate to think how much money you probably have saved me!!!
thanks a lot,
Dan

Dan, May 2007

Brilliant advice but you need to be patient. 10th time worked for me. Thank you so much.

Mel, June 2006

what a star many thanks ed thought i needed a new one then

cheers gary

gary, July 2005

Thankyou very much for this advice, we had the same problem and after trying this it is now all sorted - many many thanks !

Hazel, May 2005

Your timer needs reset. Switch off at the on off button. Now switch it on again and press the select button 4 times quickly. You should now see the left hand and right hand buttons lit. Press the select button once more and the left button will go out. Switch off at the on off button. When you next switch on it will work. If you do not get the lights in this order switch off and try again.

Ed, February 2005