I try to start a cycle and it has a short 1 sec burst of water, then it stops for a few seconds then it has another short burst of water, it repeats this process a few times and then just starts beeping, also if i go straight to a spin cycle it will have a short 1 sec pump out of water, start to move then stop for awhile, then it will repeat the process until it decides to beep at me again

Karl Thomason, June 2007

Nope, it still not working. Seemed like it was filling ok, But then when I walked in, it was just about over flowing, It didnt stop like normal. Plus when I press the power button to turn it off, it comes on by itself 5 seconds later & starts beeping at me.?????

Dan, August 2007

I have the exact same problem. So I pulled out control panel & checked curcuit board & could see no visual signs of anything burn or blown, So i put it all back together & now its working.... But for how long???

Dan, August 2007

I Have the same Problem, I Pulled out the motor Control board and its a double sided board and underneath there is a couple of blown components on mine, with carbon residue from the malfunction on the blue plastic of the box. So I need a new motor control, but unless I can find one second hand they are to dear to get a refurbished one.Check yours for same problem. best of luck

David, July 2007