GG asked ... Fix food processor motor?    |    T asked ... How do I turn the delay off on Electrolux DX302 dishwasher?    |    Helen asked ... How can I mend my Kenwood Gourmet FP505?    |    Roy Turner asked ... Kohlangaz Gosford HE fire?    |    Peter asked ... How can I mend a Powerwasher PRO PRO1800PWE?    |    Click here to ask your question

Projection TV - Magnavox LXI Oil???

What kind of oil is used between the picture tube and lens????
It is in the blue transmitter lens. In cleaning the lens the oil in this part spilled out. I would like to fix it myself, where can I obtain it if possible?
Make: Sears Magnavox LXI (purchased in 1990)
Buster, March 2005
My oil in the blue gun apparently grows algae. I have filtered it through a coffee filter but the contaminant returns in about 6 month. you have to remove the gun from the set otherwise the fluid will spill

Thom Moe, February 2011
CRT coolant change and advanced convergence - how to

I documented the procedure I did on a Philips 55" rear projection 55p916

http://tinyurl.com/lmp6eu
CRT coolant change procedure

http://tinyurl.com/l7bd7r
basic and advanced convergence

Joe, June 2009
what you are looking for is heat transfer fluid. you can obtain it from www.mcmelectronics.com they are a very reliable source for components and electronics. i recomend that you do not attempt this yourself, call a technician.

RushW, September 2007
The liquid is actually a coolant, and apparently available only through tv repair shops. Now that I've refilled the coolant, there is a problem adjusting the "convergence" of the three colors. Help?

Buster, March 2005
link Click here to see other fixes for Magnavox.