i have a audiosonic colour tv with a remote but no instructions
and the factory is stuck in the left top corner and once its on u cant do nothing with the tv unless u turn it off so we have it on tvav2 so that we dont have to toutch the tv all all other than to turn it off its starting to get very annoying if anyone can help would be very greatfull

tracey, August 2007

Had the same problem and hit the return
button and came off straight away.
Thank you so much

Calaisboi, December 2011

The picture is to wide for the screen. The whole screen is the picture but we are missing bits off the sides. How can I fix it?

Cindy Phillips, July 2010

Thanks Sheree, worked a treat!!!

lee, January 2010

just hold down 'display' key for 5-10 seconds

asish, October 2008

Hi, try this, it fixed my tv with the same problem:
Make certain the TV is receiving a signal.
Press in sequence on the remote [MENU] > [6] >[4] > [8] > [3].
[FACTORY] is displayed.
Press the above sequence again to enter [White Balance] menu.
Press the above sequence again to enter [Adjust] menu.
Press the above sequence again to exit service mode.

Sheree, August 2008

Try hitting the RETURN button on your remote control. This is the button with two arrows chasing each other, just above the DISP button. This turned off the FACTORY text on my Audiosonic KMC TH68.

PJO, June 2008