I have a Kenmore 110.24812200 and it keeps filling and won't stop. It overflows and won't ever agitate. I can manually turn it off, and get it to drain, but that is all. It has never had any problems up until today. The load before it was fine.

B, August 2007

If you take off the back of the machine you will see a thin plastic pipe running from the pump at the bottom of the machine to the switches at top, take this off at the bottom and clean all the gunge out of the rubber pipe and tube, blow through this and make sure it is clear as this operates the cut-off switch for the water.

roy, August 2007

hi. the machine will have a pressure switch on it to shut off the water at a certain level. its a round device with several wires on it at the top of the machine. it has a small hose going down to the bottom of the machine. your problem is either the switch is faulty( quite rare) or the hose thats attached to it is blocked at the bottom of the machine(or the chamber hose goes to) unblock and reconect. the hose should be empty. no water in it at all.

chris, August 2007