Chris. asked ... Miele W800 novotronic washing machine?    |    Larry asked ... How to stop my steam iron from leaking. Model dw2463 Rowenta?    |    HT asked ... Radio code Philips 22RC200/35?    |    Roberta asked ... DW5080?    |    Dave asked ... Toilet Push Button not flushing properly?    |    Click here to ask your question

fitting a new plastic bath?

shall i support the under side of the bath and the back with a 2 by 2 batten,as the kit supports legs dont look like it will take my 18 stone dead weight i think i can get a fixing with the bath in situ at the tap end as i plumbed this well back to the wall with flexi tap connections which allows me good access straight thru,then the back end which is the same again, and last, the side which is all easy to screw into the underside of the bath.also i want to fit a 2by2 frame to support the front of the bath also taking in mind the front cover panel your advice is appreciated as i want to do this way any way it looks a better way of installing im a panel beater by trade and a well capable of any diy but i am a bit slow, not slow but i do the job how i see it in the term so to speak, thanks mr f.
d foster, August 2007
agree with hi-spec there, also heard of big guys using expanding foam under bath centre board for piece of mind.

dave-evo, August 2007
inch an half x inch will be enough.
long as secured well into wall.

hi-spec plumbing, August 2007