Andrew - C asked ... Stannah 400?    |    Liam asked ... Belts for old WEBB Mower?    |    Leith asked ... Bosch Classix Type WKM41 front loader washing machine?    |    Pam asked ... Do I need to open the housing to dry the motor?    |    James asked ... Remove enterprise enrolment from an Asus Chromebook C523N?    |    Click here to ask your question

How can I fix my Glow-worm fuelsaver F?

When we went to turn on our central heating because of the wonderful summer weather we are having ,there was no response from the system. On investigating there was no pilot light on. We thought that this was due to the very windy conditions existing at the moment in the South East. We then turned the boiler setting down to zero and turned of the timing controls to "Off". We then followed the manufcturers instructions on the facia to start the system up again.
Which was ,turn the setting up to the required heat ,turn on the electricity . The fan should then come on and eventually the pilot light followed by the system coming on. No re action from the fan or the pilot light or the system.
N Palmer, August 2007
Sounds like there is no power to the system.
Check the fuses in the plug, mines next to the hot water tank, or the fuseboard.

If your not comfortable with diy best get an engineer,it would cost but he would hopefully do a good job and con you, fingers crossed
Hope this helps.

samg, January 2008
link Click here to see other fixes for Glow-Worm.