GG asked ... Fix food processor motor?    |    T asked ... How do I turn the delay off on Electrolux DX302 dishwasher?    |    Helen asked ... How can I mend my Kenwood Gourmet FP505?    |    Roy Turner asked ... Kohlangaz Gosford HE fire?    |    Peter asked ... How can I mend a Powerwasher PRO PRO1800PWE?    |    Click here to ask your question

Philips CAR 400 car radio in safe mode?

Hi
I have an M reg vauxhall astra with a car 400 radio. The radio is in safe mode so I am unable to enter the code. I have tried holding AS button whilst switching on the unit but it remains in safe mode. Can anyone think why or offer an alternate solution.

my thanks in anticipation

John
John Carter, September 2007
Hello,

I have my Philips car400 in safe mode, but I don't find my code. So I need the code:

90 532 622
serial # GM0400W2046749

Can you help me?

Andrew, September 2022
I know the correct code and pressing the AS key and don`t appear the 4 dashes on the display.
What is the procedure to appear the 4 dashes

Vitor Manuel Gaspar Lopes, June 2017
i need the code for my philips 400
90 532 621
DC 396/75E
serial # GM0400x2277572

ranger, July 2016
My Philips CAR 400 is on safe mode and doesn't let me dial 4 digit code even pressing "AS" bottom. Can you help me?

JoaoC, December 2014
GM0400Y2846306 need code. can somebody help me?

xxxx, October 2014
The radio car 400 in my opel many times I put my code wrong and it is locked completely.
He displays 7safe and after a certain period of time in case of code displays the number 7 and zeros and not the four dashes to put the code. I have the code.
If someone can help !!!!! if I can make reset!!!
thanks

stiv, September 2014
Safe 7 errors; turn on teyp then wait 10 minute. teyp will be code. then write true code

nofeartr, April 2014
Philips Car 400 Unlock Code

esmgee, March 2013
i did 3 time whrong and now show display 7SAFE.what I must do?

fuad, February 2013
hoi ik heb een opel cossa 2001
en zit een radio in van philips car 2004 hoor er in heb de code er van maar er sta 4 safe op als ik doe wat er gezegt word hou as vast dan gebeurd er niks verschijn geen streepjes voor de code in te tikken help me alvast bedankt

bertha, November 2012
als ik me as vast hou gebeurd er niks hoe kan het

bertha, November 2012
Hola, mi problema es que a pesar de tener la targeta de codigo se ha quedado fijo en 7 safe y no lo puedo desbloquear para meter el codigo, que puedo hacer? gracias.

J.L.Martin, October 2012
i have radio cassette philips car 400 serial numero it is GM0400V1524705

ayun, July 2012
1. Turn the stereo off.
2. Turn off the ignition
3. Turn the ignition back on (dash warning lights on)
4. Hold and keep down the AS button on the stereo.
5. Turn the stereo on.
6. Release the AS button after 4 dashes appear on the display
7. Now enter code (if code = 7009. Press preset button 1 seven times, button
2 once
3 once
4 nine times
If you go past you can go round again by pressing the
preset button repeatedly
8. Once all 4 numbers are correct hold down AS again until you hear a beep (2 - 5 seconds)
9. The stereo after beeping will scan to program channels
I followed the steps and worked for me
i have opel vectra with philips car radio 400

123, October 2011
where can i get the code for my car 400 radio i've misplaced it

Nan, September 2011
Hello there,

I followed the instructions step by step as indicated below:

1. Turn the stereo off.
2. Turn off the ignition
3. Turn the ignition back on (dash warning lights on)
4. Hold and keep down the AS button on the stereo.
5. Turn the stereo on.
6. Release the AS button after 4 dashes appear on the display
7. Now enter code (if code = 7009. Press preset button 1 seven times, button
2 once
3 once
4 nine times
If you go past you can go round again by pressing the
preset button repeatedly
8. Once all 4 numbers are correct hold down AS again until you hear a beep (2 - 5 seconds)
9. The stereo after beeping will scan to program channels

However from step 4,5 & 6 does not work for me.

I took the list of instructions to a local var garage who advised i need to turn the radio on - drive the car about for quite a while - and after a certain period of time the safe mode will automatically will start flashing into the 4 dashes (which i need to in order to enter the code)

Can you please confirm this is correct?

Please advise / update ASAP

Joseph, September 2011
Many thanks to pat for your answer on how to unlock astra car 400 radio in safe mode.
Worked first time saved me on headache tablets.

Marty.p, August 2011
i have a philips car 400 as well but mine says safe and when i press as it says 7 safe can any 1 help

vanco, April 2011
can anyone unlock my radio philips car 400 gm040013116351 is stamped on the side

matim stallard, January 2010
i have a philips 400 stero as well but mine says safe and when i press as it says 7 safe can any 1 help

scott, January 2010
how to obtain a code ,i called phillips customer care they cannot do, but i got all the numbers mentioned in the radio (back ,front side and back )

tom, December 2009
Timothy Pimlott - Many Thanks for your help

Mr G, November 2009
How and where can i find the code for my philips car 400 radio? GM 90 506 173

Vish, February 2009
Many many thanks to Pat,
Your process for unlocking a 'safe' mode Philips Car 400 radio worked first time on my Vauxhall Astra after a battery change.
Regards

Dick tanner, August 2008
on some radios you haveto wait for an hour with the radio switched on befor trying to enter the code after it had the code enterd incorectly try this befor trying to enter the code

Timothy Pimlott, October 2007
on some radios you haveto wait for an hour with the radio switched on befor trying to enter the code after it had the code enterd incorectlytry this befor trying to enter the code

Timothy Pimlott, October 2007
1. Turn the stereo off.
2. Turn off the ignition
3. Turn the ignition back on (dash warning lights on)
4. Hold and keep down the AS button on the stereo.
5. Turn the stereo on.
6. Release the AS button after 4 dashes appear on the display
7. Now enter code (if code = 7009. Press preset button 1 seven times, button
2 once
3 once
4 nine times
If you go past you can go round again by pressing the
preset button repeatedly
8. Once all 4 numbers are correct hold down AS again until you hear a beep (2 - 5 seconds)
9. The stereo after beeping will scan to program channels
HEY PRESTO !!
TURN IT UP - play LOUD!!!!!!!!!!!!

Pat, October 2007
90532621

kamil, September 2007
i have the same problem.. can any one please help

Yawor, September 2007
link Click here to see other fixes for Vauxhall.