THe machine starts ok but stops when it gets to heat the water I have change the programer switch and checked the heater and the heat sensers do appear to work I checked them with a meter any ideas Roy Ivory

Roy Ivory roy@rivory.freeserve.co.uk, April 2005

remove all the top filter on right a clear dome 1 screw inside 2 blue things clean them out, watch wich way they come out, put back togeather. Fill with water close door and run machine.

joe, July 2008

Just had similar problem on two dh086. Identical fault on both came down to simple problem with outlet hose. There needs to be a loop up and then down to give a trap to stop the washer syphoning and thus not retaining water enough to cover element. May not be the same problem but may help!

Barney, April 2005