home Fix label Video label_important Televisions

tv magic eye?

I recently purchased a tv magic eye ,which is intended to enable me to change sky channels in my bedroom via a link,the red light comes on to show it is working but i cannot change channels, the item does work because my daughter took it and tryed it at her house but it wont work in mine ,what am i doing wrong

olga barnes, October 2007

home Fix label Video label_important Televisionsdone

I have managed to make this work after a long time, what you do is press the menu button and go to set up and then go to channels and then go to analogue manual scan and do a scan and after about 2 minutes all your sky channels will come and everything will be working fine.

Simba, October 2012

The volume on the remote control of my toshiba color tv CF32H40 does not work up or down. Any advise, please

Herminia, April 2010

Hi

I have the problem and what you said does not really help as the RF2 output is connected and set to on.

I cannot change channels but can switch my tv on and off with my sky remote.

Furthermore, the previous eye transmitter works fine.

Suggestions?

BRX, February 2010

answer to t, Yes i have read the manual and we have done all the things we were suposed to do, the light came on but will not change channels, thats what makes me think there must be something else causing the problem but dont know what thanks anyway but is there anything else that could cause the problem

olga barnes, October 2007

In guess that you did not read the magic eye manual. In order for the magic eye to work it needs to be connected to RF2 and then to your second TV. Next you need to turn on RF2 by doing the following on your Sky box. Using your remote control, bring up the menu. Go to service. Press 4, press 0, Press 1, press select.

t, October 2007