Have a Kenmore Washer, 80 series, Model 23832100,Serial #CM4875431, Type III. Water will drain out of the washer about as fast as it fills. I took the pump out & it seems to turn freely, checked both hoses, not blocked. Don't know what else to check, HELP!

kdlongwell@peoplepc.com, December 2007

Are you saying the machine won't fill because the water is going out as fast as it is coming in?. RAISE the height of the drain pipe on the rear of the machine (This will break the siphon action by making an air gap )the pipe has been pushed to far into the stand pipe. only needs to hook in to stand pipe. If frightened it will come out tape to standpipe with strong tape.

wirecutterman, December 2007

Same as above!

David Longwell, December 2007