My Toshiba Rear projection tv model 46WH08B does not turn on. There is a relay click and the front LED flashes. What needs fixing?

Darren, May 2005

I just want to thank James for pointing me to the STK chips. I new the problem was on the PB9488 board but not what components.

I replaced both the horizontal and vertical STK392-110 chips and readjusted the convergence in service mode and my Toshiba 40WH08B now works like new.

Thanks again.

Regards

Kelvin Harley

Kelvin, May 2009

im in the same situation. I have found that one of the stk chips in the back of the tv has blown causing it to go over current.
There is a board "pb9488" in the back of the tv and on it it has green , blue , & red next to some connectors. remove the 3 connectors and try ur tv. if it works turn it off and replace one at a time then power back up. repaet for the other channel until it wont turn on. this will point to which ever stk has gone. Then try and locate a replacment chip and repair...... Hope that helps

James Kidson, November 2005