I have not used my JCB PW6 pressure washer in over a year. However, having conencted it up today and turned it on, I have found that despite the motor whirring away just fine absolutely no water is coming out of the washer gun. The hose pipe is fully open and connected correctly yet it is not being discharged anywhere. It appears to just be going into the pressure washer and staying there. I have cleaned the aret inlet with no luck. Any advice would be greatly appreciated. Thank you.

Raj Bector, June 2008

keeps cutting out after about ten minutes

Peter Pearson, September 2016

Just buzzing when switched on. We have very low water pressure, could this be it? Tamuch.

K&P, May 2013

Hi There, for starters I suggest you take out your inlet filter, I found a spider nest in mine. Next your pump could be scaled up with lime scale. It is a good idea to give it a pump flush with something like Lime away……I hope it helps

vukabrian, June 2012