Water was not being pumped away on a spin program for a Zanussi FJS1425w. Drum wouldn't turn during the program until water had been removed at machine drain flap. Found blockage in drain hose and in plumbing plastic drain pipe underneath sink. Cleared blockage, tried to test and see if water would be pumped away to the drain. Power button light coming on OK. Getting above error code flashing and alarm beeping. Pressing program buttons doesn't do anything. Pressing hold button does not work, and door is locked longer than normal before being able to open.

John Hume, June 2008

communication error between main pcb and user interface.sometimes its just a bad connection on the blue loom with 5 wires that connect the two boards together.if not loom fault then main pcb or user interface pcb has failed

ck, June 2008