home Fix label Heating label_important Home Heating Systems category Worcester

Worcester 28 cdi switches on when cold tap turned on?

When I turn on a cold tap or flush the toilet the boiler switches on.It doesn't heat the water but surely this is not right. Does anyone have the same experience with this model or any other combi-boiler. Is there any simple adjustment I can make to resolve this. Thanks

howard, August 2008

home Fix label Heating label_important Home Heating Systems category Worcesterdone

just hearing microswitches

howard, August 2008

once the flame light on panel isn't lighting then no problem. this was fairly commonplace on the cdi's i worked on.

kieran, August 2008

many thanks for your reply. Only the microswitches seem to switch on. Also I think that they come on when the cold tap is turned off or after toilet cistern has filled,
Cheers

howard, August 2008

does the flame light come on on the boiler , or are you just hearing microswitches ?

kieran, August 2008

link Click here to see other fixes for Worcester.

Fix Fault - Heating

home label Heating label_important Home Heating Systems

home Fix label Heating label_important Home Heating Systems category Worcester

Worcester 28 cdi switches on when cold tap turned on?

I can answer this question...

Worcester 28 cdi switches on when cold tap turned on?

I can answer this question ...

Worcester 28 cdi switches on when cold tap turned on?

Remove boiler cover?

Siemens RDJ10RF thermostat problem?

Greenstar Highflow 440?

Morco gb 24?

Britony Combi Se boiler 40 & 80 lights flashing?

Power but not activating Baxi 105e boiler?

Myson Touch?

Fan tries to run every 15 seconds then stops immediately?