home Fix label Audio label_important MP3 Players

Venturer HDP3202BS?

my venturer mp3 player HDP3202BS will not boot it just come up with system error any help would be most grateful

Paul Underlin, October 2008

home Fix label Audio label_important MP3 Playersdone

Hi all.

I've managed to track a working player down.

If anyone needs the firmware etc.. I can help you out at last.

Feel free to get in touch.

billyraindrums at gmail dot com

Billy x

Billy Jeffs, February 2015

Does any body no the replacement battery no for the above model

Ddaved54321, September 2014

Hello,
I found solution, but it's not easy (you need functional original Venturer HDD). File Entry.TBL and others simple guides don't help you.

You have to:

1. format new HDD
2. clone sector to sector from old Venturer HDD to new HDD (you can do it with two USB to IDE interfaces not via MP3 Player!!!)
3. format new HDD via Venturer formating menu
4. that's all :) - I use 120GB HDD in my Venturer HDP3202BS.

If you want, I can help you with them (tipek.sk at gmail dot com).

Tipek, July 2013

Did anyone have the Entry.TBL file. I need it as well. Would be really grateful if anyone could email it to saturngalaxy1 at gmail dot com

Thanks.

Mark, April 2013

Can somebody please send me the system file to mat_j_b (at) me.com thank you!

matatack246, February 2013

Hi All I have just replaced the hard drive on my venturer play and as everyone has already said I need the system file for it, can someone please email me the file if they still have it to billmyers at talktalk.net thanks in advance

Bill, September 2012

Please send me system file im in desperate need ive lost all use off my other mp3 player and want to get this one working again but need system file please send it to me at
grigoras list.ru
thanks
too confirm its the Venturer HDP3202bs

grigoras, June 2012

where do you get replacment batteries from for this unit

spenner is right, June 2011

I read the manual and it says not to format via the computer which is what I did when the music kept locking up. Your meant to format it via the menu on the actual device. If anyone wants the Entry.TBL file I can send it from this address
rich.visuals.andrew gmail.com

Richard, March 2011

hey. i need the driver software..if anyone has it can u please send to ...ehsanjunior1985 hotmail co uk

cheers

junior, January 2011

This is quite an old thread but heres a little info that may help. If the unit does not boot or just displays "charging" do the following. Switch on the player, make sure the key lock is "ON", once key lock is displayed on the screen, move the key lock to the "OFF" position, the unit will then load up the menu.

karaktakus, November 2010

looking for venturer sysytem file hdp3202bs ?
i to am looking for venturer sysytem file hdd mp3 player { hdp3202bs }
can you help. ?????
stevebillson at msn dot com

steve, October 2010

did anyone ever post this system file Entry.tbl anywhere?
cheers
Andy x
me at askanthea dot com

Andrew, September 2010

Please send me system file im in desperate need ive lost all use off my other mp3 player and want to get this one working again but need system file please send it to me at : wf6490 at live.co.uk thanks
too confirm its the Venturer HDP3202bs
Many Thanx in advance

Keith, July 2010

Update to the System file info, the second unit I have has a minor problem, when first turned on it will just show "charging", there is a work around to get the unit to function, use a terminated power tip ( i.e one of the tips you get with a universal psu, short the two prongs together ) and insert into the power socket, the unit will power on normally, then remove the tip. You have to do this each time, its a bit of a pain but avoids replacing the faulty socket if you happen to have a similar problem. The Entry.TBL file for my second unit is just over 13kb in size.

karaktakus, April 2010

Hi, I have the sytem file for this device, its called Entry.TBL and is 19.4k in size if anyone still requires it leave a message and I can email it to you. The Venturer site is hopeless and support is non existent, also the system file itself is nowhere on the net, I know as I was looking for it myself. The device driver for xp and vista is automatically installed when you connect it via usb cable. Make sure the device is powered and press the power on button otherwise windows wont detect it. Hope this helps ;)