was told on another forum should try diconnecting the battery to reset it disconnected the battery but need to solder the connections back can't find the correct gauge wire but did find telephone wire which is about one gauge bigger only it is a single wire at it's core instead of a braid of several wires will this wire be ok to use to reconnect the battery or will it not transfer enough power to the battery?

leewkiii, March 2015

Your phrase "same problem" is a bit of a mystery but no matter.

Yes - use the wire you have.

Unless you're confident in the use of a soldering you might consider finding somebody who has experience.

The big mistake that people make is too much solder and not enough heat - take care.

Good luck..., March 2015