3 hours ago Karen asked ... Royal 480nt cash register?    |    andrew smith asked ... 2009 fiesta 1388 cc titainum?    |    Eric asked ... Strimmer fuel line?    |    Frank asked ... Working fine. No cold air?    |    c.m.brown asked ... Replace chuck on aeg power drill sb2e 700r?    |    Click here to ask your question

Why am I not getting spark?

i have replaced everything on my husqvarna 335xpt chainsaw and i can not get spark turning it over with a drill.I don not have a recoil on it.Why am I not getting spark?
Dale Phillips, November 2008
the flywheel has to be about as far from the magneto coil as a folded piece if paper. When you turn the flywheel, take off the spark plug and ground it leaving it on the wire. If you don't see a spark, your spark plug may be bad. Or you still have more adjustments to make on the coil.

daniel, November 2008
Ive delt with a few of the top mounted huskys. If your magneto is too far away it won't throw a spark that far, so I'd check that adjustment, and one time, there was a wire off of one of mine up under the grip, at the shut off switch. Other than that, I don't know.

M&WTreeSvcInc, November 2008
link Click here to see other fixes for Husqvarna 335xpt.