Roy Turner asked ... Kohlangaz Gosford HE fire?    |    Peter asked ... How can I mend a Powerwasher PRO PRO1800PWE?    |    Mike asked ... Bosch WTA74200GB Vented Dryer?    |    Stuart G asked ... C3 Front Wiper control problem?    |    Clare S asked ... Repair Electriq dehumidifier?    |    Click here to ask your question

Replacing Bathroom pull switch?

Wires showing three red wires and one uncovered copper earth, two of the red wires are twisted together.
From the previous answers the two reds go into c and the other red to L1 or L2 and the earth to the other terminal is this correct?
There are three terminals on the fitting and one terminal attached to the rose what is that?
andrew, November 2008
Yeap the two twisted red wires are the live feed and should be connected to C, the other red wire should be connected to L1 - this is the switch live.
The earth (copper wire) should be covered with some green/yellow sheath or tape and connected to the terminal attached to the rose - this is so the rose is earthed.

I would have thought you should have some black wires and some more earth wires connected in the ceiling somewhere.

Remember - turn off the Electricity before you do anything

Mr Handy Andy, November 2008