Theyre graphite blocks which transfer mains power to the copper segments of the motor -Theyre probably worn down. They're quite cheap parts and easy to replace. Power off, drag machine out onto the floor, remove the back cover and locate the motor. May help if the machine is tilted at an angle or laid on its side. The brushes are at the other end of the motor from the drive pulley. The holders are plastic or bakelite and are generally held in with screws or plastic clips. Also, look at the copper segments they run on to check for burning or pitting. If the segments are burnt or damaged you need a replacement motor or a replacement armature (motor part) if you can source one. Occasionally may be a fault in the motor drive circuit board - in which case replacement of board only real option.
Spares suppliers:
www.4directelectricals.co.uk
http://www.ukwhitegoods.co.uk
www.ukapplianceparts.com
http://www.domesticspares.co.uk
http://shop.ezee-fix.co.uk
http://www.espares.co.uk
or simply go into google and type in "washing machine spare parts" - selecting "pages from uk".
Repair and service your own washing machine. Go to www.2ndwave.co.uk/manual.html
dannyboy, December 2008
