Just had Eurovox Max V given back from repairer but when i plug in it keeps saying no signal any help appreciated

helpreq, December 2008

sorry about that i had to go out , you change the symbole rate , with the remote , , just type in 6887 for ntl , and you must be on them numbers if your useing ntl" when your in the powerscann box , the frequence rate" is ( START 100mzh ) and the (STOP 870mzh) and the symbol rate is 6887 for ntl , type all of them in order into the boxes , and when you have that right , press the powerscann ,

mick, December 2008

Problem solved i changed the frequency to 522.50 and that allowed me to change symbol to 6887 then did power scan again and now i have all channels and picture just all in strange order not stored in fav that key not working but at least i have channels THANKS

helpreq, December 2008

should the frequency be all 0's as the message i get when i try to change the symbol is invalid frquency rate??

helpreq, December 2008

hi mick my quality is reading 2% and i cant change symbol rate it is on 6.952 but i am on ntl how can i change it i took box in because i could not get pin code to work and had lost signal, pin works now but still no signal when i plugged back in but screen now says channel currently not available

helpreq, December 2008

check this out , press menu,go to (installation) next go down to (user instalation) ok that" the pin , number should be 0000 , now in the new window that opens up ,look at the (symbol rate) if your on NTL , it should read 6887, if your on tellewest it should be 6952 , so if you have to change it to the right one for you , do it with your remote , and when your in that window , check the ( Quality bar, ) at the bottom , what % is it showing ? if all is right there after any changes that you had to make , do the power scann again , oh by the way what was broken on your box?? ill check back here after ,, mick

mick, December 2008

RF IN Son has tried doing full power scan and now lost all channels as well?

helpreq, December 2008

were have you got the cable pluged in at the back , in what port??

mick, December 2008