Hello there, I was wondering if someone might be able to help me with this. I've got a Diplomat ADP 8234 Dishwasher, but it's stopped working. Once you've selected a programme and closed the door, you can hear the pump working - though there's no longer any water left to pump out, but then the cycle stops and the machine just beeps. Inside, the light by the start programme button is flashing. Does anyone know what might be wrong, or at least how to reset this machine? I would appreciate it.

Dylan, November 2005

The fault light indicates that the anti flood device has been tripped. With the power off, remove the lower plynth of the dishwasher and see if there is water in the bottom. If there is water in the base, drain it out using either a towel or a syringe. Turn the appiance back on and see if it starts the cycle. If this works, leave the appiance washing and check for any leaks. If there are no obvious leaks then reduce the fill pressure on the inlet valve of the machine. This usually works!

Richard, January 2006

the flashing lights indicate an error. im trying to find the meanings of the various light squences. try seaching the web icant find the codes yet

brian, January 2006