My tv isn't working. The red light on the top of the screen is flashing? I've tried everything - making sure all connections are in place, have turned it off/on, etc. Please help. Thanks.

Marty, February 2009

i fixed mine myself e-mail me at mickrv(at)blueyonder.co.uk and i'll tell you how. (at)=sign that goes in an email address

Mick, October 2009

I have the same problem and replaced all the caps that looked buldgy. But still same problem. Any other suggestions? Thanks

Fusion, September 2009

Hi, all just to let you no i had the same problem i had a look at the board and it is 1000uF 25V CAP that has gone i put a new one on and my tv works!

Thanks

Tim, September 2009

I received a TV with this very same problem. I found a bulgey cap under a transistor heat sink. It si a G-LUXON 1000uF 25V CAP. It was obviously thermal failure. Once replaced the TV operated as normal. I hope this helps.

Dom, May 2009

I have exactly the same problem mate, i cant find anywhere how too fixx this problem....

The redlight comes on as normal when you turn the power on, then when you hit the standby button it just continues to flash and never seems too "boot" up. No picture, no sound just a flashing standby light? if anyone could help it would be much apprecaited.

tom

Tomz0r, February 2009