Bob asked ... Charger fault?    |    Terry nelson asked ... How to remove the flexible shaft from a curved shaft ryobi t?    |    Matt Longmore asked ... Non-start on Flymo XLT 250?    |    John asked ... How to fix my fireplace?    |    Ian Scott asked ... Remove cover off gas boiler?    |    Click here to ask your question

How to fix a very hot compressor and coil not cooling?

The compressor gets very hot ( and starts to smell ) and the coil doesn't get cold. Any ideas?

Matsui model MAT1200
Martiin H, February 2009
Martin

Check also that the coils are not clogged with dirt and that the unit can breath ie filters are not clogged up

kennyf, April 2009
Martin
sounds like the compressor has siezed but isn't pulling enough current to trip the fuse. maybe a 13 amp fuse where it should be a 5 amp.
Is the compressor making any sound? is the pipe leaving the compressor cold? is the other one hot? they should be. If both hot then its just heat transfer from the overheating compressor and your back at a siezed or part siezed compressor.
Is the fan for blowing air through the unit running? if not it doesnt cool the condensor coil, the compressor goes high pressure and overheats. It should shut itself down then though. If you have a pal with a clamp ammeter ask him to measure the current draw i'd expect about 3 amps the rating should be on the unit plate and if your drawing more than the rated current then its sayonara to your dehumidifier, its cheaper to replace than repair

kennyf, April 2009
link Click here to see other fixes for Matsui.