I have a rollexa roll-a-way garage door. Rollexa have gone bust and I need some replacement spring metal straps that attach the door to the powered roller. Anyone know where I can get some?

Richard Wallis, April 2009

Portico Products will supply a strap to replace the spring metal straps originally fitted by Rollexa. However, these straps are thicker than the originals so the door winds up a few cms higher - and in my case stopped above the vertical guide rails.
So you have to change the limit switch position. Do this by winding the door fully down. On the side of the motor are two press buttons with arrows showing direction of rotation of the roller drum. Select the press button adjacent to the arrow in the direction of the roller winding up. Depress this push button and wind the door up to the height you want it, stopping it with the remote control. Release the push button. This should have set the limit at that position. You can also adjust the down position with the other push button. May all need a bit of trial and error.

Tony, April 2010

portico products 0121 553 7222 see the web site

BOYD, March 2010

rollexa uk cheshire

ian, September 2009

I fit roller doors, and can get new T springs .

leslie, September 2009

Call Portico Products of Birmingham 0121 553 7222.
They are the suppliers to the trade.I guarantee they will have what you are looking for. They will want to know if there are location slots in your motorised barrell or are your old straps rivetted on.

Chameleon of Lincoln., April 2009