After moving the washer without installing the shipping bolts, I hooked it up and started it and within a few moments water began to leak from under the left side of the machine. I opened up the front and rear panels and discovered that a number of parts had been damaged during the move. I ordered all the parts that I could tell were either broken or leaking, etc. The electronics seem to be OK. I was about to attempt to replace these parts when I thought there might be a service manual available.
I have the manuals that came with the machine, including a parts manual. What do you all recommend? I figure that I could invest some of my time and $ to see if the machine will recover. 3 of the four shocks are broken. I intend to replace all 4. Also the front drain hose is leaking. The rear pulley has a piece out of it as well.As I mentioned, I do have the repair parts list and that is what I used to order the parts. This machine is mounted on top of a pedestal and was working fine before I moved it. Please provide advise and comments on the availablility of a repair manual. Thanks, Dennis

Dennis Katz, April 2009