I have no idea how to change halogen light bulb - the model is 75W / Osram / 1050 Im / Halopin model.
On the end there are two wires and I can not find it anywhere how should I acctually plug the dead bulb out of the socket - I am afraid to crush it. Because than - I guess I have even bigger problem...
I didnt come to the part of how you actualy fix in a new bulb - but would be grateful if you advise on this as well...
(its really embarassing asking how to change a light bulb, but - now Im getting almost desparate...) Million THX!

Tizianna, April 2009

Have tried this several times but the capsule just will not budge,any ideas?

hughie, December 2012

This type of lamp has a G9 base or cap made by folding over the two protruding FerNiCo alloy lead in wires into two loops and folded alongside the flattened pinch seal of the bulb. To remove such a lamp from its socket simply pull it straight out along the axis of symmetry of the lamp. Do not apply any twisting force to the bulb of the lamp as the flattened seal will shear off in the socket and be quite difficult to extract and could cause a laceration injury. Although I have never actually seen a G9 socket I can deduce that it consists of a pair of springy "kissing lips" type contacts fixed into a ceramic insulating, temperature resistant body, between which the flattened seal of the lamp and loops are pushed.

Andrew, June 2009

I think this will be a G9 bulb, with looped wire ends? It pulls straight out of its socket, and the new one pushes back in the same way. Mains off, please!

John, April 2009