my upvc door lets in drafts how can i tighten up the door to make it draft free

mrs hawkins, May 2009

I also forgot to mention that on top of the door frame where you will have to gets some steps to see it ,there is a small celindrical devive with an allen key fitting if you turn this slowly in a certain direction you should see it move backwards or forwards cause its in an offset hole this will tighten the door to the frame when you lock it ,,but dont over do it just turn it bit by bit and keep checking to see if the door closes and locks

tezza, May 2009

depending on the type of door (belive me there are loads) if it has hinges onthe outside then look at the top and bottom of one of the hinges there should be a plastic cap pull it off and you will see a allan key bolt inside this raises the door or lowers the door..and there sould be a small plasis cap right at the front or the hinge inside there is the same type of thing but much smaller this adusts the door tilt .. hope this helps.

tezza, May 2009