GG asked ... Fix food processor motor?    |    T asked ... How do I turn the delay off on Electrolux DX302 dishwasher?    |    Helen asked ... How can I mend my Kenwood Gourmet FP505?    |    Roy Turner asked ... Kohlangaz Gosford HE fire?    |    Peter asked ... How can I mend a Powerwasher PRO PRO1800PWE?    |    Click here to ask your question

Heating?

I have a 10 year old Boulter Camray 90-110 and it will only run correctly if I remove the front cover panel! with the front cover panel fitted, it just keeps firing up and shutting down continuosly every few seconds, I have removed the flu, baffles etc, cleaned & replaced everything including cleaning out the inside of the boiler and the problem is still eactly as it was?
John Robertson, May 2009
Thank you very much for your help, I stripped the flu down and rebuilt/sealed it and that problem has now gone.
However another problem has come to light, we have a 210 litre megaflo tank and the boiler will not fire up to heat hot water unless I set the Danfoss motorised valve to manual, I bought a new motor yesterday and replaced it but the problem is still there?

John, May 2009
This Fault is being caused by Combustion gasses being drawn into the Air intake on the Balanced flue, the flue will need to be stripped down and resealed, this should remedy the problem

www.elanar.co.uk, May 2009
clean the photocell

e, May 2009
link Click here to see other fixes for Boulter Camray.