Hello,
First off, remove the endcaps off the control panel if you have them. Remove the 2 screws in front of the console and slide in forward slightly and then tilt it back. Unplug the lid switch harness that was under the console. Take a straight screwdriver and remove the 2 brackets by sticking the screwdiver in the bracket and leaning the handle of the screwdriver towards the back of the washer. Once those are off, stand in front of the washer and grab either the front or the 2 sides and rock the washer cabinet toward you. The whole cabinet is removed for easy access to the inside of the washer. Hope this helps.
JP, February 2006
