I follow the John Anderson recomendation (on top), and he was right, a piece of clothe was on the pump, I cleaned it, and now is working well. Thanks John
Gustavo Calvo (Mexico), February 2007
also they redesign the pump and motor. they went to a bigger motor with a smaller pump. seems the old pump would get hard to turn and the motor was not big enough to start. new assembly is about 110.00 , FL code could be either the pump/motor assembly or the sensor
John Anderson, February 2006
fl means flood, the water level sensor needs to be replaced, they stick after time. It is located in the panel to the right as you stand in front of the washer. It will have a clear plastic line and a wire harness to it. Marked FLD about 30 bucks
