The CF 80 that I have seen do not have a permanent pilot light. It is lit by the control box when heat is called for.
Bob, October 2009
I don't think Hi-spec has ever seen a Kingfisher CF, its a permanent pilot, follow Johns instructions and all should be well, but the Thermocouple may need repalcing
Boiler Repairman Suffolk, August 2009
there is no button on the gas valve and ignition button to press on the kingfisher its all done on the front panel.
the reset button etc.
turn the dial to 0 then push the reset button in.
pilot light gos out it electronic ignition.
hi-spec plumbing & heating (essex), August 2009
Press the button on the gas valve and hold it in, press the igniter button sharply a few times (spark symbol maybe) and watch for the pilot to light, keeping the gas button held for 10 seconds or so. Release the gas valve button slowly, and the pilot light should stay lit if all is well.
