does any one know how to the quick search on the universal remote bd - 512 or have the codes for a digilogic freeview box?

Thanks!!

dennis, August 2009

Sencor dvd

Mira, January 2016

I have gone through the instructions with a fine-toothed comb, and I have trawled the net for answers, and it now seems quite apparent that the BD512 was never intended to work with freeview boxes

Frans, January 2012

whats the code for a tevion tv plz.

claire, January 2011

can i use the bd 512 to tune in my telly, i can't figer it out?

nicki, October 2009

BD-512
Universal Remote Controller

Copy of Instruction Manual

User Instructions for Universal Remote Control.

This is a multi-functional unit with the following features:-
Operates up to 12 devices. TV1/TV2/VCR1/VCR2/Satellite TV/Cable TV/VCD/DVD/CD/HiFi/AUX/Amplifier.
Operation models (4) are :- Set-up mode, Quick search mode, Auto search mode, Display mode.
LED indicator for transmission and set-up.

Setting up.

If you are setting up an AV device please make sure that a tape or disk inserted.
Look in the BRAND CODE LIST to find the 3 digit code for device, brand name, and model.
Press and holdthe [SET] key, then press the device key e.g. [TV1][VCR][SAT] etc.
When the LED indicator lights up release both keys.
Input the 3 digit code for the device. The LED indicator will go off if the code number is correct. If the code is incorrect the LED will flash twice and remain in the set-up mode. Input another code from the BRAND CODE LIST.
If at any time you want to leave the set-up mode, press the device key. The system will come out of the set-up model after 10 seconds if no other key is pressed.

Quick Search

If you are unable to find the correct code for your device in the BRAND CODE LIST, then you can use this procedure to search automatically for a code.
Press and hold down the [SET] key, press the device key [TV1/VCR/etc.]. The LED indicator will be on. Release the pressed keys. Press the [SET] key again and release it. The unit is now in Quick search mode, and the LED will keep flashing.
The direction of searching can be changed by pressing the [SET] key.
Point the control at the device you are setting up and press the [POWER] key. If the selected device operates, check the rest of the functions such as [VOL], [CH+/-]. If the device cannot be controlled, repeat the instructions in this paragraph.
To change the direction of search, press the [SET] key.
To leave the search mode press the device key and the LED indicator will go off.

Auto Search

Power on the device to be controlled. If it is a VCR a tape must be inserted.
Press and hold [SET] key for more than 3 seconds and the Auto Search will begin. Press any key to exit.

fran399, September 2009

Press and hold down the SET key,press the device key TV1/VCR etc..The LED will be on.Release the pressed keys,press the SET key ,point the unit at the device and press POWER key, repeat until device switches off, turn device back on and check that the VOL+/- works), (To quit search mode press the device key you used and the LED will turn off(GOOD LUCK))

Stuart Bruce, September 2009