1 hour ago Dave asked ... REpair kettle lid?    |    Sandy asked ... Replace vertical gear on Singer Fashion Mate 252?    |    Blaablaa asked ... How can I fix?    |    pete asked ... Flymo 330 turboglide?    |    keith asked ... Fuseboard( s) location of renault trafic t1100 1993?    |    Click here to ask your question

how can i get to the pump in my fisher and paykel washing machine?

i have a fisher and paykel washing machine displaying error code 37 which i am told is a blocked pump, how do i get to the pump to unblock it?
meg, September 2009
Bail as much water out as you possibly can by hand using a small jug. Then make sure power is off at wall & tip machine back against the wall as far as you can. Look under at the front right hand side & you will see drain pump. It has a small plastic fan on it to cool it. Try turning the fan part by hand back & forward as sometimes this will be enough to move the blockage & allow pump to spin. If not then you will have to remove the pump & clear the blockage.

Lincoln Appliance NZ, September 2009