33 mins ago Clare S asked ... Repair Electriq dehumidifier?    |    Bob asked ... Charger fault?    |    Terry nelson asked ... How to remove the flexible shaft from a curved shaft ryobi t?    |    Matt Longmore asked ... Non-start on Flymo XLT 250?    |    John asked ... How to fix my fireplace?    |    Click here to ask your question

my eurovox ex5000?

using a nikkai usb and cable connecters
danny1625, October 2009
mick thanks for all your help mate its working now,your last answer helped thankyou your some guy ;-)

danny1625, October 2009
ok danny i just had another read of your question , bit early in the morning for a Irishman ,ha , if your happy that the usb, to 9 pin com , lead is sending the firmwear to the box , and you can see the word DLOAD as its flashing the box , on the screen of the , box , and you have the right firmwear going into the box" , if you go to the menu, and go to (installation) look for (deep scann) and use that scan mode . that will scann (all transponders 6887/ 6952? ect) if your on ntl you should be scanning symbol rate 6887. check that out first , tell me do you have a (full channell list)?? even if its showing them as scrambled?

mick, October 2009
we you take a look at 4 questions back down the list , (how to flash a starbox ) i know you have a eurovox" but you flash all boxes the same way , via a null cable , through the rs232 port on the box and the pc. one cable linking the box to the pc , a problem people have is the dont have the rs232 port on , their pc , older pc . and some laptop have them do you ?

mick, October 2009