Hi, I must be the only one this fix didn't work for!! I removed the 4blue wires and their terminals cleaned the contact points and re-assembled as per instructions.But on switching back on first "err" came on followed by "er90" and a high pitched bleep.I've cleaned the filter and check everything I can think of.what now??

ian, November 2009

did you remove the wires from the display printed circuit board end in the fascia and clean the contacts on the pcb?.to do this properly will require you to remove the fascia panel and then remove the pcb and clean tracks on the edge connector.if this fails to work you are looking at a pcb display board or a main pcb or both!

ck, November 2009