How much i can put the pressure in my boiler?

Thuva, December 2009

I assume you are referring to a combi boiler - when the system is cold top up to 1.2 mbars.
If you've no leaks on the system then you need to investigate why there's a lack of pressure - check the pressure in the expansion vessel.
When the system warms up the pressure should stay the same. If it rises then the internal expansion vessel is undersized.
Constant increases in pressure like this stress the diaphragm and you'll find it constantly losing a little pressure.
The only solution then is to fit an external expansion vessel to cope with your system volume.

Nige, December 2009

hope this helps your question is a bit funny !ie
1 how can i put pressure in it
2 how much to put in it

1 you refill a combi boiler using a filler loop pipe.
2 the amount you put in is 1 to 1.5 bar pressure cold on the gauge reading

wirecutterman, December 2009