After a power cut the boiler will not turn on for the heating unless it is switched to continous radiator mode.

I've reset the link to the transmitter and pretty sure that is working, but it refuses to turn on.

The transmitter has the little flame symbol on meaning the boiler should be on. If I reduce the temp. setting the flame symbol goes.

Changed the batteries. Etc etc

david, January 2010

may be faulty stat in that case, but i'd phone worcester tech and confirm first as they won't be cheap

Ian, January 2010

Thanks - i've tried that and i'm pretty sure the two things have bonded.
What it looks like is that boiler thinks it doesn't need to turn on due to the time.

On the "once" or "timed" setting the bolier is off. Switch it to "on" and the heating comes on.

I've reset the programms back to the factory setting so it should be on at this time of night.

david, January 2010

you may need to re-set the radio link between the stat & the reciever so they can talk to each other.

instrutions here...

http://www.worcester-bosch.co.uk/cache/file/9/dt10rf-digistat--mk-2--instructions.pdf

Ian, January 2010