tom dimmock asked ... How can i mend the lid on russell hobbs elec?    |    Jerry asked ... Alpine 7287?    |    Guy asked ... Gaggenau fridge alarm problem?    |    mike asked ... Fisher & Paykel 913t dishwasher?    |    Emma asked ... Foot pedal smoking?    |    Click here to ask your question

HOW TO REAPLACE BELT ONE 80 SERIES DRYER ?

I NEED TO PUT A NEW BELT ON THE OLD ONE BUSTED. I HAVE TEH BACK PANEL OFF AND THE TENSIONER ARM IS OUT, SO HOW DO I GET TO THE PLACE TO PUT THE BELT IN?
JUSTIN, April 2006
If the filter is on the top, remove it and then remove the 2 screws next pull the top foward and up ensure unit is unplugged, remove the 2 screws on the front panel and lift up and your good to go. If you have the access panel on the front use a puddy knife and depress the 2 clips and remove panel, next remove your springs and the yellow with red tracer wire for your moisture senor, remove 2 bottom screws, remove end caps on control console and remove 2 screws, lift panel next remove 3 screws on top panel and slide forward and the rest is a breeze.

Kevin, April 2006
link Click here to see other fixes for Whirlpool 80 Series.