i have had my 3cx for a few months and am new to it all .
1st problem is in 1st and 2nd it will not nove but in 3rd and 4th it will
it seamed fine the last time i used it.
it did stop moving the uther day i just pushed it out of gear then bk in and it wos fine that wos wen i wwos using it last.
it is 2002 with power shift.

cupel of uther problems not majot but wud like advise but if i can not fix them i will rewire them
1.put driving lights on but only lite up on side lights.
2.press horn and the fuse blows .
3.wipers work but wen i press water 4 them it blows wiper fuse.
4.flasher out put power top at front does not work
5.in fuese box 1 of the black blocks gets hot thats in with the uther relays

thomas behagg, February 2010

i went to my jcb tonite and the gears all work ok enyy ideas wot wud of happend

tom, March 2010

but wen i setecteach gear i can hear the relays going and i can also here the solanoids working in gearbox area

so does this mean that my powershift gears are working fine ie shuttel lever

tom, March 2010

i have removed the power shift lever but i can not c how it comes apart

tom, February 2010

i had similar problem with jcb 412. if the power shift is on the shuttle leaver grip shift it probably is the connections in the shuttle stick, it can be split and if you clean the connections with wd40 it should work. hope this helps

wildfarmer, February 2010