home Fix label Heating label_important Home Heating Systems category Potterton

heating needs to be on for hot water ?

replaced the pcb excell 80e in december 09 fault was heating had to be on for hot water ran ok since but just recently same fault as before need advice what to do now

Raymond., March 2010

home Fix label Heating label_important Home Heating Systems category Pottertondone

thats again Ian,
just for a matter of interest would this cause the PCB to fault out again with the same fault after running 2 to 3 months.PCB still under warranty they have told me to send it back to be checked out before they replace it under warranty.

raymond, March 2010

won't be the thermistor. may be the dhw microswitch

Ian, March 2010

thanks ian.
i just phoned the gas fitter, he said that the dhw diapragm was replaced at the same time as the pcb fault may now be the thermistor

raymond, March 2010

you need a new dhw diaphragm, whoever fitted the pcb for that fault must've been a joker.

Ian, March 2010

link Click here to see other fixes for Potterton 80E.

Fix Fault - Heating

home label Heating label_important Home Heating Systems

home Fix label Heating label_important Home Heating Systems category Potterton

heating needs to be on for hot water ?

I can answer this question...

heating needs to be on for hot water ?

I can answer this question ...

heating needs to be on for hot water ?

Advice?

Remove cover off gas boiler?

Fan tries to run every 15 seconds then stops immediately?

Oil fired boiler thermostat?

Britony Combi Se boiler 40 & 80 lights flashing?

Boiler problem?

Remove boiler cover?

Greenstar Highflow 440?