i have a fault f13 on my dyson cr01 washing machine ,
i read on here it's the heater sensor , and this is at the front of the machine , where abouts at the front is it found as i have a spare machine to take it off but not sure where it is .

nigel, March 2010

Hi Nigel, You have to remove the plastic front panel of the machine (take off top cover, disconnect & remove control panel & front doors, undo 2 top screws on front panel then push it downwards & away from machine body). The element housing is under the drum at the front of the machine. Disconnect electrics & undo securing bolt of old element & remove. Do ALL with power off and unplugged. As in all good Haynes manuals, 'Refitting is the reverse of removal' :-)

GH, April 2010